@article { author = {jafari fesharaki, parviz and Forughizadeh, Mohsen}, title = {Selecting the optimal wastewater treatment process in an industrial research complex using AHP method}, journal = {Emergency Management}, volume = {9}, number = {1}, pages = {43-52}, year = {2020}, publisher = {Malek Ashtar University of Technology in collaboration with the Iranian Association of Safety Sciences}, issn = {2345-3915}, eissn = {2345-4741}, doi = {}, abstract = {Effluent of wastewater treatment plants as an alternative water source in many applications and restrict the uncontrolledexploitation of high-quality water resources. Before the design and implementation of wastewater treatment plants, youshould use the methods based on scientific reasonable assumptions to determine an appropriate process of treatment. Theaim of this study is to select the optimal wastewater treatment process in an industrial research complex using multi-criteriaanalysis. The present study used the Analytic Hierarchy Process (AHP) to select the optimal process of human’s wastewatertreatment plant and processes such as Septic tanks, stabilization ponds, aerated lagoons, activated sludge, tricklingfilter and MBBR were assessed technically, operationally, economically and environmentally. The results showed that theMBBR process, activated sludge, trickling filter, septic tanks, aerated lagoons and stabilization ponds with final weightsof 0.280, 0.197, 0.162, 0.133, 0.116 and 0.112 were ranked first to sixth respectively. The sensitivity analysis also showedthat the changes in weight of AHP criteria don’t show significant changes in the final result and MBBR process has beenin first place almost in all modes unless the relative weight of economic and environmental criteria are replaced. In thiscase, Septic tanks were slightly higher than MBBR. According to the results, the highest priority of treatment processesbelonged to MBBR.}, keywords = {Wastewater treatment,Selection of Optimum,Multi-criteria analysis methods,Analytic Hierarchy}, title_fa = {انتخاب فرآیند بهینه تصفیه فاضلاب یک مجتمع تحقیقاتی صنعتی به روش (AHP)}, abstract_fa = {پساب تصفیه خانه های فاضلاب به منزله ی یک منبع آب غیرمتعارف می تواند در بسیاری از مصارف مورد استفاده قرار گیرد و برداشتبی رویه ی منابع آب با کیفیت را محدود نماید. پیش از طراحی و اجرای تصفیه خانه های فاضلاب باید با استفاده از روش های مبتنی برفرضیات علمی مستدل، فرایند تصفیه ی مناسب را تعیین نمود. هدف از این تحقیق انتخاب فرایند بهینه ی تصفیه ی فاضلاب برایطراحی در یک مجتمع تحقیقاتی- صنعتی با استفاده از رو شهای تحلیل چند معیاره است. در این پژوهش از روش تحلیل سلسله مراتبیAHP( ( برای انتخاب فرایند بهینه ی تصفیه ی فاضلاب انسانی این مجتمع استفاده شده است و فرایندهای سپتیک تانک، برکه یتثبیت، لا گون هوادهی، لجن فعال، صافی چکنده و MBBR از نظر معیارهای فنی- اجرایی، اقتصادی و نیز محیط زیستی مورد ارزیابیقرار گرفتند. نتایج نشان داد که فرایندهای MBBR ، لجن فعال، صافی چکنده، سپتیک تانک، لا گون هوادهی و برکه ی تثبیت نیز بهترتیب با وزنه ای نهایی 280 / 0، 197 / 0، 162 / 0، 133 / 0 و 116 / 0 و 112 / 0 در رتبه های اول تا ششم قرار گرفتند. در تحلیل حساسیتتحلیل سلسله مراتبی مشخص شد که با تغییر در وزن معیارها تغییر چندانی در نتیجه ی نهایی ایجاد نمی گردد و تقریباً در تمامی حالت هافرایند MBBR در رتبه ی نخست قرار گرفته است مگر در حالتی که وزن های نسبی معیارهای اقتصادی و محیط زیستی جا به جا شوندکه در این حالت گزینه ی سپتیک تانک با اختلاف اندکی بالاتر از MBBR قرار می گیرد. در نهایت نتیجه گیری این پژوهش نشان داد کهروش MBBR بالاترین اولویت را از آن خود کرده است.}, keywords_fa = {تصفیه ی فاضلاب,انتخاب گزینه ی بهینه,رو شهای تحلیل چند معیاره,تحلیل سلسله مراتبی}, url = {https://www.joem.ir/article_45864.html}, eprint = {https://www.joem.ir/article_45864_eb5574814d754f7df0196dde6a6687db.pdf} }